NOCO Genius BoostPro GB150 Manual
This manual provides information on the NOCO Genius BoostPro GB150, a portable lithium-ion battery jump starter booster pack that delivers 3000-amps for jump starting a car, boat, trucks and more. The GB150 also features a built-in power source for charging USB devices, a flashlight and a 12-volt plug for powering other devices.
Introduction
Welcome to the NOCO Genius BoostPro GB150, a powerful and versatile jump starter designed to get you back on the road quickly and easily. This compact and lightweight device is packed with features that make it an essential addition to any vehicle owner’s toolkit. The GB150 boasts a powerful 3000-amp jump start capability, enabling it to jump start a wide range of vehicles, including cars, boats, trucks, and more. Beyond jump starting, the GB150 serves as a portable power source, providing a convenient solution for charging USB devices like smartphones and tablets. Additionally, the GB150 features a 12-volt plug, allowing you to power various accessories like air compressors, power inverters, and more.
This manual will guide you through the features, operation, and safety precautions associated with the NOCO Genius BoostPro GB150. It’s essential to carefully read and understand the information provided in this manual before using the GB150. By following the instructions, you can ensure safe and efficient operation, maximizing the performance and longevity of your jump starter.
Getting Started
Before using your NOCO Genius BoostPro GB150 for the first time, it’s crucial to ensure it’s fully charged. The GB150 comes partially charged out of the box, but it needs a full charge before you can use it to jump start a vehicle or power any devices. To charge the GB150, connect the included AC charger to the GB150 and plug it into a standard household outlet. The LED indicator on the GB150 will illuminate red during charging and turn green when the charging process is complete. Allow sufficient time for the GB150 to charge fully, as this ensures optimal performance and maximum jump start capability. It’s recommended to charge the GB150 for at least 24 hours before its first use. This initial charge will help condition the battery and ensure it’s ready to perform at its best.
Once the GB150 is fully charged, you’re ready to use it. Familiarize yourself with the GB150’s features and components, including the jump start cables, the USB charging ports, the 12-volt plug, and the manual override button. Review the safety precautions outlined in this manual to ensure safe and responsible operation of the GB150. With the GB150 fully charged and the safety precautions in mind, you’re ready to start using this powerful and versatile jump starter.
Connecting To The Battery
Connecting the GB150 to a battery requires careful attention and adherence to safety procedures. Always ensure the vehicle is turned off, the ignition is in the “Off” position, and the engine is not running. Locate the battery in your vehicle, which is typically found under the hood. Before connecting the GB150, make sure to identify the positive (+) and negative (-) terminals of the battery. The positive terminal is usually marked with a “+” sign or a red color, while the negative terminal is marked with a “-” sign or a black color.
Connect the red clamp of the jump start cable to the positive (+) terminal of the battery. Secure the clamp firmly to ensure a good connection. Next, connect the black clamp of the jump start cable to the negative (-) terminal of the battery. Again, ensure the clamp is securely attached to prevent any loose connections. Avoid connecting the black clamp to any metal parts of the vehicle’s frame or engine. After connecting both clamps to the battery terminals, ensure that the clamps are secured and cannot become loose or dislodge during the jump start process.
Once the GB150 is connected to the battery, it will automatically detect the battery and enter Boost mode, indicated by the white flashing LED. The GB150 is now ready to jump start the vehicle. However, always refer to the vehicle owner’s manual for specific jump starting procedures and precautions for your vehicle model.
Manual Override
The NOCO Genius BoostPro GB150 incorporates a Manual Override feature, allowing you to bypass the automatic safety protection mechanisms and manually initiate a jump start. This feature is designed for situations where the GB150 is unable to detect a battery or when the battery voltage is below 2 volts. However, exercising caution is paramount when using Manual Override, as it disables the safety protections that safeguard the GB150 and the connected battery;
To activate Manual Override, press and hold the Manual Override button for three seconds. This will trigger the Charge LEDs to start chasing, signaling the activation of Manual Override. The GB150 will then attempt to jump start the vehicle, regardless of the detected battery voltage. During Manual Override, the GB150 operates with reduced safety protections, and the risk of damage to the GB150 or the battery increases. Therefore, only use Manual Override as a last resort and exercise extreme caution.
After activating Manual Override, connect the GB150 to the battery as described in the “Connecting To The Battery” section of this manual. Once the GB150 is connected, the jump start process will begin. Monitor the jump start process closely and discontinue if any unusual behavior or warning signs are observed. Remember, using Manual Override can be risky, and it is essential to understand the potential consequences before proceeding.
Low Voltage Batteries
The NOCO Genius BoostPro GB150 is specifically engineered to jump start 12-volt lead-acid batteries that have discharged to as low as 2 volts. This capability makes it a valuable tool for jump starting vehicles with deeply discharged batteries, often encountered in situations like prolonged inactivity or accidental battery drain. However, jump starting batteries with very low voltage presents unique challenges and requires careful consideration to ensure both safety and successful jump starting.
When dealing with low voltage batteries, it’s crucial to understand that the GB150’s safety features may not be fully effective. The GB150’s automatic detection and protection mechanisms are designed to work optimally within a specific voltage range. With batteries below 2 volts, these mechanisms may be compromised, potentially leading to unexpected behavior or reduced effectiveness. Therefore, exercising caution and adhering to safety procedures is paramount when jump starting low voltage batteries.
Before attempting a jump start, consult your vehicle’s owner’s manual for specific precautions and recommended methods for jump starting. Additionally, ensure you understand the potential risks associated with jump starting low voltage batteries. These risks include the possibility of sparks, overheating, or damage to the GB150 or the battery. Always prioritize safety and follow the instructions provided in this manual to avoid potential hazards.
Charging the GB150
The NOCO Genius BoostPro GB150 comes partially charged out of the box, but it needs to be fully charged before you can use it. To charge the GB150, simply connect it to a standard wall outlet using the included AC adapter. The GB150 will automatically begin charging, and the LED indicator will illuminate to show the charging progress. The GB150 is designed to charge efficiently, but the charging time may vary depending on the remaining charge level and the type of outlet you are using. For optimal charging, connect the GB150 to a standard wall outlet and allow it to charge for a minimum of 24 hours. Once the GB150 is fully charged, the LED indicator will turn solid green.
While the GB150 is charging, avoid using it as a power source or for jump starting a vehicle. This will ensure that the GB150 is fully charged and ready to use when needed. It is also important to note that the GB150 is a lithium-ion battery, which has a longer lifespan than traditional lead-acid batteries. However, to maximize the battery’s life, avoid storing the GB150 in extreme temperatures or for extended periods without use. If the GB150 is not going to be used for an extended period, it is recommended to charge it to 50% capacity and store it in a cool, dry place.
Regular charging is essential to maintain the performance and longevity of the GB150. By following these simple charging instructions, you can ensure that your GB150 is always ready to provide reliable jump starting and power for your devices.
Using the GB150 as a Power Source
The NOCO Genius BoostPro GB150 is not only a powerful jump starter, but also a convenient power source for various devices. With its built-in USB ports and 12-volt plug, you can power a range of electronic gadgets and accessories while on the go. The GB150’s robust battery can provide enough power to charge your smartphone, tablet, laptop, or even a small portable refrigerator. To use the GB150 as a power source, simply connect your device to the appropriate port. The GB150 will automatically detect the device and provide the necessary power output. The USB ports are compatible with most standard USB devices, while the 12-volt plug can be used to power a variety of 12-volt accessories, such as a car vacuum cleaner, tire inflator, or portable fan.
When using the GB150 as a power source, it’s important to be mindful of the device’s power consumption and the GB150’s remaining battery life. The GB150 has a built-in LED indicator that displays the current battery level. You can use this indicator to monitor the remaining power and plan accordingly. To ensure that the GB150 has enough power to jump start your vehicle, it’s recommended to avoid using it as a power source for extended periods, especially if you plan to use it for jump starting soon after. Additionally, always refer to the device’s user manual for specific power consumption information and charging recommendations.
The NOCO Genius BoostPro GB150’s power source capabilities make it a versatile and indispensable tool for any traveler or outdoor enthusiast. Whether you’re on a camping trip, road trip, or simply need to charge your devices while away from a power outlet, the GB150 can provide the necessary power to keep you connected and powered up.
Troubleshooting
While the NOCO Genius BoostPro GB150 is designed for reliability, occasional issues may arise. Understanding common troubleshooting steps can help resolve these problems effectively. If the GB150 fails to jump start a vehicle, ensure the battery terminals are clean and free of corrosion. Check the connections to the battery and the GB150 to ensure they are secure. Verify the vehicle’s battery is not completely dead. If the battery is below 2 volts, the GB150 may not be able to jump start it. Confirm the GB150 is fully charged. If the GB150 is low on power, it may not be able to deliver enough current to jump start the vehicle.
Should the GB150’s LED indicators behave erratically or fail to function, check the power source. Ensure the GB150 is properly connected to a power source and that the source is providing sufficient power. If the GB150 is not charging, the charging cable or adapter may be faulty. Try using a different cable or adapter. If the GB150 is not powering a device, check the device’s compatibility. Ensure the device is compatible with the GB150’s USB ports or 12-volt plug. Verify the device is turned on and functioning properly. If the GB150’s flashlight does not turn on, check the battery level. Ensure the GB150 is adequately charged. If the flashlight still does not work, the flashlight may be defective. Contact NOCO customer support for assistance.
If you encounter any persistent issues with the GB150, it is recommended to contact NOCO customer support for further troubleshooting guidance. NOCO offers a comprehensive support system, including a dedicated website, phone number, and email address. Their team of experts can assist with resolving any problems and ensure the GB150 operates optimally. Remember, regular maintenance, such as keeping the battery terminals clean and the GB150 fully charged, can help prevent issues and ensure a longer lifespan for your device.
